Suspended Ceiling Grid Slot Punch
Posted By admin On 14.06.20Related Articles
- This grid punch makes it easy to punch holes into suspended ceiling frame and tees for hanger wire attachment. Hole makes wire attachment quick and easy. The Suspend-It brand line of drop ceiling installation tools and fasteners is well known for quality, value, ease of use, performance and durability.
- Visit the post for more. All mains are slotted every 6 and so we will measure 9 ½ past the slot scribe a mark on main using our tape armstrong field rout tool slot punch silhouette xl 9 16 bolt slot 1 8 reveal swatch convenience concepts suspended ceiling installation 1 8 in grid punch.
- Ceiling Grid Punch Pliers, 1/8 or 3.175mm, Hole Punch by Strictly Ceilings - Hand Tool Hole Punches - Amazon.com.
- Donn® DX®/DXL™ Rust Resistant Acoustical Ceiling Suspension System is the most widely used acoustical suspension system available. How is the load test data collected for ceiling grid? And rotate it until the cross tee pops up and out of the slot.
- Jul 24, 2018 Suspended ceiling grid punch for making rivet holes all mains are slotted every 6 and so we will measure 9 ½ past the slot scribe a mark on main using our tape pro series grid punch pliers image unavailable. Pics of: Armstrong Ceiling Grid Slot Punch.
Jul 22, 2012 Re: Accoustical ceiling punch They do exist, as a company i worked with 5+ years ago had one. Fineline grid system, so no space to rivet. 50+ lights to be installed so a lot of extra work if we have to cut the tabs and pin T's above the grid. Suspension Systems (Grid) Kamco Supply distributes ceiling suspension systems from Armstrong, USG, Chicago Metallic and Shanko throughout Eastern Pennsylvania (PA), Southern New Jersey (NJ), Maryland (MD), Virginia (VA) and Washington D.C. Kamco is suited to handle both large and small building supply needs for residential and commercial construction.
- 1 Remove a Dropped Ceiling With Lighting
- 2 Install a USG Suspended Ceiling
- 3 Replace Suspended Ceilings
- 4 Anchor a Suspended Ceiling to Ceiling Hangers
Over time, a suspended ceiling can become damaged or you may want to change the look and feel of a room that has an installed suspended ceiling. Either way, you will need to patiently disassemble the metal gridwork holding the ceiling together. Removing the pieces correctly ensures that the ceiling pieces will not be damaged during the disassembling process and that you won't be injured during the removal.
1
Set up a stepladder near one perimeter wall of the room. Make sure you can reach the border ceiling tiles -- ending at the wall -- without extending your body past the sides of the ladder. Shadow panther slot machine free.
2
Select a border tile that does not have any accessories mounted to it. Some common accessories include air conditioning vents, lights or speakers. Push one side of the tile up, angle it slightly away from the ceiling grid, and twist it in the opening until it slides through the grid. Set the tile in a safe location. Move around the room while removing all border and then field ceiling tiles. Stack them neatly if they are to be reused.
3
Pull up the insulation covering the connection between air conditioning vents and the flex duct attaching them to the air conditioning system. Grab the head of a strap holding the inner flex liner to the vent collar with a pair of lineman's pliers. Twist the strap head clockwise until it snaps. Pull the flex off the vent collar. Remove the vent or the tile holding the vent using the method described for the ceiling tiles.
4
Turn off the breaker powering the lights installed in the ceiling grid. Remove the cover from each fluorescent light fixture using the light manufacturer's instructions. Thread a piece of tie wire through one of the holes in one of the tabs attached to the top of the light fixture. Tie the other end of the tie wire to one of the hooks securing the ceiling wire to the supports of the house. Attach one piece of tie wire to the remaining three corners of the light. Repeat the procedure on all lights installed in the suspended ceiling. Loosen each piece of tie wire to lower the lights to the floor.
5
Hold one 2-foot ceiling tee-grid with your nondominant hand. Push up on the point the 2-foot ceiling tee enters the slot of a main support tee. Pull the tee away from the support tee. Remove all 2-foot tees and set them aside.
6
Cut the ceiling wires with the lineman's pliers. Ensure that the end of each support wire sits flush with the bottom of the securing tabs. Lower each main tee to the ground carefully to avoid damage. Set all main tees aside.
Suspended Ceiling Grid Slot Punch Ideas
7
Remove the screws holding the border angle from the walls by turning each mounting screw counterclockwise with a Phillips screwdriver. Score the underside of the angle with the blade of the utility knife, if the angle is caulked to the wall. Pull the angle away from the wall slowly.
Things You Will Need
- Stepladder
- Lineman's pliers
- Flathead screwdriver
- Tie wire
- Phillips screwdriver
- Utility knife
Warnings
- Wear safety glasses, gloves and a long-sleeved shirt when removing ceiling tiles from a suspended ceiling.
- Make sure the stepladder is stable before climbing.
- Never step on either of the top two rungs of a ladder.
References (1)
Photo Credits
- Ryan McVay/Digital Vision/Getty Images